Frequently asked questions

Answers about choosing, ordering and using Youyong pad printing machines, screen printing machines, UV-LED curing equipment and UV adhesives from Dongguan Youyong Machinery Equipment Co., Ltd.

Choosing the right machine

What is the difference between pad printing and screen printing?

Pad printing picks up ink from an etched steel plate with a soft silicone pad and presses it onto the part, so it suits small, curved, recessed and irregular surfaces. Screen printing pushes ink through a mesh screen; it suits flat parts, larger print areas and thicker ink layers, and curved-surface models print on cylindrical and conical parts such as bottles and cups.

Which pad printing machine should I choose?

Choose by print size and number of colors. Youyong desktop and 4X4 monochrome models have an optimum printing area of 70×70 mm. The 4X6 models print up to 120×70 mm and come in two-color and four-color versions, and the servo shuttle machines print four or six colors. Send a photo of your part and the logo size and we will suggest a model.

Can your screen printers print on bottles, cups and other round parts?

Yes. The SC-300A curved screen printing machine prints round, conical and flat surfaces, with a printing area of 250×200 mm and a part diameter of 80 mm. The servo SC-400A has a printing area of 350×200 mm and a part diameter of 110 mm, with an optical registration system.

Which materials can be printed?

Our machines are used on plastic, metal, glass, silicone, PET film, cardboard and PCB boards, for parts such as plastic keys, nameplates, membrane switch circuits, labels, automotive parts, stationery, toys, electronics and gifts. The ink has to suit the material, so tell us the substrate when you ask for a quotation.

Do I need a UV curing machine?

You need UV curing when you use UV inks, UV coatings, UV varnish or UV adhesives, because they harden only under UV light. Youyong supplies water-cooled and air-cooled UV-LED curing equipment and a portable handheld UV lamp, and the curing unit can be set up together with the printing machine.

Which UV wavelength do I need?

The wavelength has to match the photoinitiator in your ink or adhesive. Our UV-LED curing equipment is available at 365, 385, 395 and 405 nm; the handheld lamp works at 395 nm. Send the ink or adhesive datasheet and we will confirm the wavelength.

Water-cooled or air-cooled UV-LED curing: which is better?

Water-cooled equipment uses a circulating water system to remove heat, so the high-power LED light source can run continuously for long periods. Air-cooled equipment needs no external water circulation and is more compact, so it is easier to install and integrate into an existing production line.

Can the machines be customized?

Yes. Assembly-line flat screen printers and fully automatic servo curved screen printing lines are built to order. The irradiation width and power of UV-LED curing equipment are configured for your line, pad printers can use customized ink cups and oil pans, and fixtures can be made for your parts.

Installation and operation

What power supply do the machines use?

Most pad printers and smaller screen printers run on 110V or 220V, 50 Hz; the large 4060 and 5070 screen printers and the turntable model run on 220V. We build the machine for the voltage used in your country.

Do I need an air compressor?

Yes. The pneumatic pad printing and screen printing machines need compressed air at 5–6 bar. UV-LED curing equipment and the handheld UV lamp do not need compressed air.

Is the machine tested before shipment?

Yes. Every machine gets a full machine test before shipment: parameter setup, test printing, UV curing inspection, registration accuracy check and performance verification.

Ordering and shipping

What is the minimum order quantity?

The minimum order is 1 machine.

What is the lead time?

Lead time is 10–15 days.

How do I pay?

Payment is by international bank transfer (SWIFT / T/T).

How are machines shipped?

By sea or by air. Machines are wrapped and fixed on a wooden pallet or packed in a wooden crate for export.

Warranty and after-sales service

What warranty do you offer?

Machines carry a 1-year warranty. During the warranty period, replacement parts are free and the customer pays the shipping cost.

How do you help with installation?

We guide installation and commissioning by video, so your team can set up and adjust the machine without an engineer on site.

How do I get technical support?

Contact our team by WhatsApp, WeChat or email for remote technical support.

Can I buy spare parts and consumables?

Yes. Steel plates, silicone pads, screens, inks, squeegees and other parts and consumables can be ordered from us.

UV adhesives

How do I choose a UV adhesive?

Send the materials you are bonding, the joint design, the bonding area and your curing equipment. We will suggest a grade from our UV adhesive range for glass, metal, plastics, electronics, displays, new energy, medical devices and transfer decoration.

Can I buy the UV lamp and the adhesive together?

Yes. Youyong supplies both UV-LED curing equipment and UV adhesives, so the lamp wavelength and the adhesive can be matched.

>

Talk to Youyong Sales

Share your material, part dimensions and production requirements. We can help you review equipment or adhesive options and request a quotation.

Phone / WhatsApp: +86 199 2583 7001 · +86 191 2421 7699

Monday–Saturday, 09:00–18:00 (China Standard Time, UTC+8). If the team is offline, leave your contact details in the chat window.